Volkio Carburator Cleaner

VOLKIO CARBURATOR, THROTTLE BODY & BODY INTAKE CLEANER is an aggressive solvent blend formulated to quickly clean fuel injector throttle body, throttle valve, idle air control valves, PCV valves, and other intake components where deposits occur. These deposits can cause rough idling, stalling, hard starting and poor acceleration. Stop smoke for is an engine oil treatment that when added to engine oil will seal the gaps between worn internal moving engine parts. It will reduce oil burn, engine wear and harmful emissions.

THROTTLE BODY: Remove air intake bellows. Spray to coat residue build-up on throttle plate and surrounding surface. Reattach bellows, start engine sd with vehicle in park, depress the gas pedal about half way a few times to clean.

METAL PARTS: Spray on metal parts. if necessary, wipe clean, onlyuse on unpainted metal surfaces.

FEATURES AND BENEFITS:

Stops and prevents oil leakages through seals
Eliminates the need for expensive engine repair
Makes seals swell back to original size and regain all-new pliability
Prolongs the service life of the engine
Reduces emission of hazardous exhaust gases
Improves engine performance by enhancing motor compression
Operating Instructions

Pour entire contents of this bottle into fuel tank. One bottle treats up to 15 gallons (56.78 Liters) of diesel fuel.

ADDITIONAL INFORMATION : For further information about product safety please consult Safety Data Sheets.
SHELF LIFE : 3 years minimum. Store tightly closed in the original container in a dry area at temperatures between 5 and 40°C. Avoid direct sunlight.

DOWNLOAD TDS DOWNLOAD MSDS

Description

Volkio German Lube Carburettor Cleaner is a high-quality cleaner designed to be used for cleaning the interior and exterior of carburettors and valves, without disassembly. Our Carburettor Cleaner was created with quality and safety in mind and now represents an essential part of every automotive workshop.

FEATURES AND BENEFITS:

- High dissolving properties
- No leftover residue
- Non-corrosive properties that make this carburettor cleaner suitable for metal parts and surfaces
- 360° valve that allows the spray to be used in any direction, up and down, which only further contributes to cleaning efficacy.

Operating Instructions

Before treating the carburettor, switch off the engine and leave it to cool down completely. In the meantime, remove the air filter from the vehicle. Once the motor is cool, spray the exterior of the carburettor until the contamination disappears completely. Next, spray the visible parts of the carburettor and leave the cleaning solution to take effect. At this point, you can start the engine and let it idle with limited speed. Spray the air inlet with the carburettor cleaner and increase the engine speed. Install the air filter only after the cleaning process is complete and the engine is switched off.

Additional information

Material	METAL SPRAY BOTTLE
Packaging Available	300ML
Directions	Open the engine for 5-10 minutes Remove the air cleaner. For the engine at fast idle (5000-6000rpm), spray the carb cleaner into the air-horn, flooring choke, throttle shafts and plates. Gums, varnishes and Carboic Deposits will be burnt away through exhaust gases. Turn of the engine and install the air cleaner again. For the Fuel Injection system, spray 1/2 can of this Carb Cleaner directly into 1/2 tank fuel.